By .(JavaScript must be enabled to view this email address) - 26 November 2009, 10:01
In News

Czech Republic’s FiT rate slashed by 5%

The feed-in tariff rate in the Czech Republic of between €0.50/kWh and €0.52/kWh is locked in for 20 years, yet the Czech government has always held a possible annual cut for this rate, which has a maximum cost decrease of 5% per year. This 5% cut has now been announced and will be fully implemented at the beginning of 2010.

Energy generators who produce solar energy sold to any of the country's three main power distributors from the beginning of 2010 onwards will now receive approximately €0.475-0.494/kWh according to the Energy Regulatory Office.

The Czech Republic has so far attracted a good amount of investment in Eastern Europe due to its generous subsidies, yet investors are now concerned that Prague may reduce the FiT even further. Czech capacity is therefore expected to reach somewhere in the region of 200MW by the end of 2009 as investors rush to install all planned power systems before the tariff rate is slashed.

All
News
Blog Posts
TV & Video

Photovoltaics International 16th Edition

This sixteenth edition of Photovoltaics International marks four years of production of the quarterly journal. As always, our focus is on efficiency and quality improvement and cost reduction in manufacturing. As 2012 rolls along, companies are falling by the wayside due to supply and demand issues, ASP declines and drastic governmental subsidy cuts. A clear picture of 2012 is offered through papers from the likes of TÜV Rheinland, Fraunhofer ISE, SEMI PV Group and EPIA, amongst others.
Photovoltaics International Lite, Volume 05 - 2011

This digital interactive Lite sees Tom Cheyney follow Agua Caliente’s progress on becoming one of first truly utility-scale PV power farms, where 40–50MW (AC) will be commissioned by the end of the year. We also feature one of the world’s largest silicon thin-film PV power plants, Avenal; a report on warnings of the collapse of module prices from Solarbuzz and PI-Berlin presents tips on PV module testing. A print version of this edition will be distributed at Solar Power International 2011 in Dallas, Texas.
Manufacturing The Solar Future: The 2012 Production Annual

Manufacturing the Solar Future 2012, the second in the Photovoltaics International PV Production Annual series, delivers the next installment of in-depth technical manufacturing information on PV production processes.

Czech Republic’s FiT rate slashed by 5%

We Recommend

Latest in News

1. Obama and Chu pin hopes on Team USA’s solar innovation

2. DoC announces preliminary anti-dumping margins against Chinese manufacturers

3. First Solar announces plans to open office in the United Arab Emirates

4. New chemical edge isolation tool from Manz offers higher process stability

5. Concerns of Chinese retaliation colour CASM’s victory

1. DoC announces preliminary anti-dumping margins against Chinese manufacturers

2. First Solar announces plans to open office in the United Arab Emirates

3. Concerns of Chinese retaliation colour CASM’s victory

4. PV Crystalox to receive €90 million cash settlement over terminated wafer supply deal

5. SolarWorld claims competition has been restored with DoC’s determination

1. PV module costs and prices–what is really happening?

2. Other than First Solar, who holds a low-cost manufacturing benchmark?

3. Solar short takes: Suniva implements ion implantation, First Solar turns knobs, CIGS gets purified

4. Eye on Stion, Part II: Getting a taste of tandem-junction CIGS PV layer cake

5. Don’t look now, but UK PV installation figures are out

1. PV-Tech Newscast – December 16, 2011

2. PV-Tech Newscast – December 1, 2011

3. Trident Solar details its ‘VersaEtch’ Etchant / n-Dopant material for inkjet SE applications

4. PV-Tech Newscast – March 30, 2012

5. PV-Tech Newscast - February 10, 2012

PV-Tech Newscast—May 25th, 2012 (07:15)

PV-Tech Newscast – May 18, 2012 (05:22)

PV-Tech Newscast—May 11, 2012 (06:03)

Partners

Acknowledgements

Solar Media