Your daily dose of Photovoltaic Technology Developments and Solar News
IMEC touts industrial crystalline Si solar cell efficiencies of 17.4 percent
Most Popular Articles
- Top Stories 2008 – Power Generation – the good, the bad, and the efficiency
- Acciona’s Portuguese PV plant may be big, but one of the numbers just doesn’t add up
- Top Stories 2008 - Thin Film – orders, gigawatts and growth
- Top Stories 2008 – Cell Processing – efficiency is the name of the game!
- 1GW solar power plant planned in China
Editor's Picks
Latest Videos
IMEC has claimed a breakthrough in crystalline Si
solar cell efficiencies that have reached an efficiency of 17.4 percent
with the potential to scale to efficiencies above 20 percent with a
decrease in cell thicknesses, according to the R&D centre based in
Leuven, Belgium.
The breakthrough comes from several years of research
into a new cell concept dubbed ‘i-PERC’ (Passivated Emitter and Rear
Cell). The PERC technology was not previously applicable to volume
production solar cell applications; however the ‘i’ addition denotes
‘industrial’ use.
According to IMEC, the new process uses very thin
silicon layers (<180µm) in which the classical Al back surface
field, covering the whole rear of the Si solar cell, is replaced by
local Al-alloyed contacts. In this process the rear is passivated by a
dielectric stack, in which the contact openings are realized by laser
ablation. Subsequently, an Al contact layer is evaporated which is
fired in a belt-line furnace to create local back-surface fields.
IMEC also developed small-area crystalline Si solar cells with evaporated contacts. Lab-scale silicon solar cells have been realized, where for the first time the i-PERC process has been used as a method to passivate the rear side and to create local contacts. At the front side random pyramids are used in combination with a standard silicon nitride layer to provide good optical properties and surface passivation.
The evaporated Ti/Pd/Ag front contact grid is patterned by standard lithography. First attempts immediately resulted in an efficiency of 19% with an impressive short-circuit current of more than 39mA/cm2, IMEC said.
Partners
