Popular Articles
Sunovia set to take on First Solar in two years? - 01 May 2008
Xtreme Concentrated Photovoltaics start-up claims 5 cents per kWh - 29 April 2008
Polysilicon shortages will spur thin film CAGR of 70 percent through 2010, says iSuppli - 02 May 2008
Sunovia claims lab breakthrough for commercialization of single crystalline epitaxial CdTe/Si - 12 May 2008
Metallurgical solar-grade silicon could reshape PV industry, says PHOTON Consulting - 09 May 2008
Product Briefing Outline: Honeywell
has developed a new material called ‘PowerShield’ PV325, which is
designed to provide greater levels of protection to photovoltaic solar
cells and modules that are located in more hostile environments. The
material is UV-, moisture- and weather-resistant, and designed to also
withstand the electrical load produced by the modules, which can
operate at up to 1,000 volts of electricity. The material was developed
primarily for rigid PV modules, which are specifically designed to feed
power into a utility or local power grid.
Problem: Backsheet material performance is impacted by a variety of factors. The true validation of overall backsheet performance and value can only be confirmed via testing within specific modules themselves. Honeywell believes that by providing the backing system as well as the critical barrier component, photovoltaic module producers have one source to address their needs relative to the backing material, optimizing performance and value while providing a more integrated backing solution.
Solution: The reflective white material is based on Honeywell's high-performance barrier film technology. The dielectric, or insulator material, has a traditional five-layer design that includes two outer protective layers based on ethylene-chlorotrifluoroethylene (ECTFE) fluoropolymer film and a core polyethylene terephthalate (PET) layer, as well as two inner bonding layers of proprietary adhesive material. The design is an alternative to traditional backing systems based on poly-vinyl fluoride (PVF).
Applications: Rigid PV modules used for utility or local power grids that experience harsher or humid conditions.
Platform: Nominal 325μm (13.0 mil) semi-gloss white opaque composite specifically designed as a durable dielectric backsheet for crystalline Si photovoltaic modules rated for 1000 VDC. PV325 includes two outer protective layers based on ethylene-chlorotrifluoroethylene (ECTFE) fluoropolymer film and a core polyethylene terephthalate (PET) layer. Two inner bonding layers of proprietary adhesive material are also used.
Availability: May 2008 onwards.
