JinkoSolar smashes solar module shipments record

Facebook
Twitter
LinkedIn
Reddit
Email
The company also reiterated full-year 2017 shipments to be in the range of 8.5GW and 9.0GW.

Updated: Leading ‘Silicon Module Super League’ (SMSL) member JinkoSolar reported record PV module shipments of 2,068MW in the first quarter of 2017, exceeding guidance. 

JinkoSolar’s record quarterly shipments are also an industry milestone, becoming the first module manufacturer to ship over 2GW of modules in a quarter. However, the global quarterly shipment record is not set to last long. JinkoSolar guided second quarter shipments to be in the range of 2.5GW to 2.6GW.

This article requires Premium SubscriptionBasic (FREE) Subscription

Unlock unlimited access for 12 whole months of distinctive global analysis

Photovoltaics International is now included.

  • Regular insight and analysis of the industry’s biggest developments
  • In-depth interviews with the industry’s leading figures
  • Unlimited digital access to the PV Tech Power journal catalogue
  • Unlimited digital access to the Photovoltaics International journal catalogue
  • Access to more than 1,000 technical papers
  • Discounts on Solar Media’s portfolio of events, in-person and virtual

Or continue reading this article for free

JinkoSolar’s record quarterly shipments are also an industry milestone, becoming the first module manufacturer to ship over 2GW of modules in a quarter. However, the global quarterly shipment record is not set to last long. JinkoSolar guided second quarter shipments to be in the range of 2.5GW to 2.6GW.

Kangping Chen, JinkoSolar's Chief Executive Officer commented, “Module shipments during the quarter hit a record high of 2,068MW, a 19.3% increase sequentially while generating US$839.3 million in revenue. We continued to capitalize on the growing recognition of JinkoSolar's brand and high quality products and services to increase our market share and capture new opportunities during the quarter.”

The company also reiterated full-year 2017 shipments to be in the range of 8.5GW and 9.0GW.

JinkoSolar’s confidence in its full-year guidance rests with its global footprint and strength in the Chinese market. 

“Demand in China remains strong with growth momentum expected to continue into the next quarter. While the June 30 Feed-in-Tariff has created some uncertainties in China's utility-scale market, we haven't seen demand weaken. Our deep involvement in the Top Runner and PV Poverty Alleviation projects as well as distributed generation projects will provide strong support for demand during the second half of the year,” added Chen. 

Margin squeeze

Despite the record shipments, JinkoSolar was notably impacted by supply chain dynamics. Higher polysilicon purchase prices in the upstream and strong module ASP declines in the downstream led to further gross margin squeeze.

“Our gross margin contracted to 11.2% from 14.3% last quarter as a result of a slight decline in the average selling prices (“ASP”) of solar modules, increased silicon prices and material costs caused by a shortage of supply in the first quarter. We believe our margins have room to improve in the second quarter and throughout the second half of the year as our mono wafer and PERC cell capacity increases and polysilicon prices stabilize,” noted Chen.

Financial results

JinkoSolar reported first quarter 2017 revenue of US$839.3 million, an increase of 12.8% from US$737.6 million in the fourth quarter of 2016 and an increase of 9.4% from the first quarter of 2016. The sequential and year-over-year increases were mainly attributable to an increase in solar module shipments in the first quarter of 2017.

Gross profit in the quarter was US$94.3 million, down from US$105.1 million in the fourth quarter of 2016. The sequential and year-over-year declines were mainly attributable to a decline in the ASP of solar modules in the first quarter of 2017.

As already noted, gross margin was 11.2% in the first quarter of 2017, down compared with 14.3% in the fourth quarter of 2016 and 20.5% in the first quarter of 2016, primarily due to polysilicon purchase ASP’S and declining module ASP’s. 

Income from operations in the first quarter of 2017 was US$8.2 million, down from US$11.2 million in the previous quarter. Operating margin in the quarter was 1.0%, compared with 1.5% in the fourth quarter of 2016 and 10.0% in the first quarter of 2016.

JinkoSolar reported cash and cash equivalents of US$249.0 million at the end of the quarter, down from US$406.2 million at the end of 2016. Accounts receivables due from third parties were US$860.9 million, down from US$684.7 million at the end of the prior quarter.

The company held higher inventory in the first quarter of US$780.2 million, compared to US$644.3 million at the end of the prior quarter. JinkoSolar said the inventory build was due to strong anticipated demand during the second quarter of 2017.

Gross profit in the quarter was US$94.3 million, down from US$105.1 million in the fourth quarter of 2016. The sequential and year-over-year declines were mainly attributable to a decline in the ASP of solar modules in the first quarter of 2017. Image: JinkoSolar

Manufacturing update

JinkoSolar noted that it continued to ramp its in-house capacity of monocrystalline wafers and PERC (Passivated Emitter Rear Cell) capacity, which is expected to reduce the overall cost of mono-based modules and also halt margin pressures. 

The company noted that mono PERC products remained in short supply and that its capacity has already been fully booked out for the rest of the year.

Management noted that mono PERC module shipments in the first quarter were around 100MW, only accounting for around 5% of shipments. However, this is expected to increase to between 350MW to 400MW in the second  quarter of 2017 and be around 500MW per quarter in the second half of the year, accounting for around 20% of shipments.

However, in-house capacity levels at the end of the first quarter of 2017 remained at the same levels as the fourth quarter of 2016. Wafer production stood at 5GW, solar cell at 4GW and module assembly stood at 6.5GW. 

With strong module shipments in the first quarter and further increases guided in the second quarter, JinkoSolar management noted in its earnings call that it had increased reliance on OEM third-party module supply to meet demand. This also impacted margins in the quarter. 

Manufacturing cost reductions continued at the previous pace as previous quarters. Non-silicon production costs dropped from US$0.25/w in the fourth quarter of 2016 to US$0.24/W in the first quarter of 2017. However, blended costs remained static at US$0.35/W in the first quarter of 2017. 

8 October 2024
San Francisco Bay Area, USA
PV Tech has been running an annual PV CellTech Conference since 2016. PV CellTech USA, on 8-9 October 2024 is our second PV CellTech conference dedicated to the U.S. manufacturing sector. The event in 2023 was a sell out success and 2024 will once again gather the key stakeholders from PV manufacturing, equipment/materials, policy-making and strategy, capital equipment investment and all interested downstream channels and third-party entities. The goal is simple: to map out PV manufacturing in the U.S. out to 2030 and beyond.
26 November 2024
Málaga, Spain
Understanding PV module supply to the European market in 2025. PV ModuleTech Europe 2024 is a two-day conference that tackles these challenges directly, with an agenda that addresses all aspects of module supplier selection; product availability, technology offerings, traceability of supply-chain, factory auditing, module testing and reliability, and company bankability.

Read Next

Subscribe to Newsletter

Upcoming Events

Solar Media Events
April 10, 2024
Dallas, Texas USA
Solar Media Events
April 17, 2024
Lisbon, Portugal
Solar Media Events
May 1, 2024
Dallas, Texas
Solar Media Events
May 21, 2024
Napa, USA