Requires Subscription: Photovoltaics International Archive

First Solar to introduce 400W large-area CdTe thin-film modules

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Share on email
Email

By Mark Osborne, senior news editor, Photovoltaics International

First Solar is introducing new production lines to manufacture its 400W large-area ‘Series 6’ modules.

L3dwLWNvbnRlbnQvdXBsb2Fkcy9sZWdhY3ktcHVibGljYXRpb24tcGRmcy8wMDYwYWJiMzZiLWZpcnN0LXNvbGFyLXRvLWludHJvZHVjZS00MDB3LWxhcmdlYXJlYS1jZHRlLXRoaW5maWxtLW1vZHVsZXMucGRm

Published In

Photovoltaics International Archive
This issue of Photovoltaics International focuses on the steady adoption of PERC as the technology of choice for providing a quick boost to cell performances. Our chief analyst, Finlay Colville, reports that PERC is a key driver for internal technology roadmaps of all silicon cell providers and is indirectly influencing the development of other technologies in competing n-type and thin-film segments. However, PERC is not without its drawbacks, and one of these is its increased susceptibility to light-induced degradation. Other highlights include ISC Konstanz on the future of back-contact technology and ECN on the development of a new technique for minimising recombination losses in silicon solar cells.

Read Next

Photovoltaics International Archive
Photovoltaics International Papers, PV Modules
With mature product offerings now available from several of the leading industrial PV equipment and tool manufacturers, and latest-generation ECAs available from suppliers, this article aims to provide important background information on ECAs, as well as give a brief overview of some of the challenges and cutting-edge developments in ECA-related PV applications.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
This paper reviews those associated fabrication technologies for the mass production of Ni/Cu-plated contacts. The technologies currently in use in the PV industry for plated contacts, as well as the developing technologies having high scaling-up potential, will be reviewed. In addition, the future requirements for plating metallization will be discussed.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
This paper discusses what is actually behind these announcements and how an evolutionary industry sector such as PVis becoming, it seems, decidedly revolutionary with large jumps in efficiency.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
This paper presents an analysis and the results of extensive simulations of the efficiency limits and roadmap to 25.5% of a tunnel oxide passivated contact (TOPCon) solar cell, on the basis of an efficiency level of 25.21% (designed area, identified by ISFH) achieved through three years of continuous technical optimization on a pilot line at Longi.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
The development of new ways of increasing the production throughput for passivated emitter and rear cells (PERCs), as the major solar cell technology in the global market, is an area of great interest to the PV community. This paper presents approaches for significantly increasing the throughput of PERC production processes. The main focus is on the tube furnace processes for the emitter formation and oxidation, with the introduction of the High Temperature Stack Oxidation (HiTSOx) approach. Additional approaches that are currently under investigation at Fraunhofer ISE for increasing the throughput for wet-chemical, printing and laser processes will also be briefly outlined.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
The holy grail of every solar cell producer is the creation of a lowcost interdigitated back-contact (IBC) solar cell with an efficiency greater than 25%, a goal that can be found in almost every roadmap presentation. In this paper it will be shown that we are not far away from achieving this target, since IBC devices, with different process complexities, are already in production at several companies.

Subscribe to Newsletter

Upcoming Events

Upcoming Webinars
January 26, 2022
Free Webinar
Solar Media Events
February 23, 2022
London, UK
Solar Media Events
March 8, 2022
London, UK
Solar Media Events
March 23, 2022
Austin, Texas, USA
Solar Media Events
March 29, 2022
Lisbon, Portugal