Requires Subscription: Photovoltaics International Archive

Large-area solar simulators: critical tools for module manufacturing

Facebook
Twitter
LinkedIn
Reddit
Email

By Harvey B. Serreze, Advanced Technology Engineer & Product Manager, Spire Corporation; Roger G. Little, Chief Executive Officer and President, Spire Corporation

The importance of rapid and accurate measurement of the electrical power output and related characteristics of photovoltaic (PV) modules or panels concluding the manufacturing process cannot be overemphasized. Even though these modules will likely be deployed under a variety of outdoor solar illumination conditions, they must be tested under a set of standard conditions to assure consistency of results demanded by both the manufacturer and the customer. The ability to provide a measurement tool for this critical manufacturing step that possesses the proper specifications and qualities, ranging from spectral accuracy to ease-of-use, is imperative.

L3dwLWNvbnRlbnQvdXBsb2Fkcy9sZWdhY3ktcHVibGljYXRpb24tcGRmcy9lNmE0ZDhjNmU4LWxhcmdlYXJlYS1zb2xhci1zaW11bGF0b3JzLWNyaXRpY2FsLXRvb2xzLWZvci1tb2R1bGUtbWFudWZhY3R1cmluZy5wZGY=

Published In

Photovoltaics International Archive
The first edition of the Photovoltaics International journal, published in August 2008, was created in response to what was deemed to be a growing need for an unbiased technical publication for the solar cell and module manufacturing industry. With this in mind, the first edition of Photovoltaics International saw the commissioning of papers from a wide range of sectors, such as NREL’s overview of the CPV sector, IMEC’s thin-film efficiency gains via plasma texturing, site selection with IBM PLI, Q-Cells on silicon nitride thin films and Navigant Consulting’s market overview.

Read Next

Photovoltaics International Archive
Photovoltaics International Papers, Thin Film
Two-terminal tandem solar cells based on perovskite/silicon (PK/ Si) technology represent one of the most exciting pathways towards pushing solar cell efficiencies beyond the thermodynamic limit of single-junction crystalline silicon devices. While laboratory efficiencies of these tandem cells have risen to very impressive levels, many important innovations towards enabling their eventual manufacturability have also been made in this rapidly evolving field. In this paper, a number of these processing innovations are highlighted in order to give a more complete view as to the viability of scaling up the processing of these devices. Specifically, the focus is placed on how today’s crystalline silicon process flows could be adapted in order to allow existing cell lines to produce PK/Si cells.
Photovoltaics International Archive
Photovoltaics International Papers, PV Modules
This paper presents a way to evaluate production windows and related field issues using an adapted failure mode and effects analysis (FMEA) approach. Since PV modules are the most important component in terms of longevity and warranties, the focus of Fraunhofer’s work has been on module manufacturing. The process, however, can also be applied to cell manufacturing and other steps in the value chain.
Photovoltaics International Archive
Photovoltaics International Papers, PV Modules
Low-temperature interconnection processes for high-efficiency PV cells will be a key R&D topic in the coming years. In reality, to avoid significant deterioration of the surface passivation, the metallization and interconnection processes of silicon heterojunction (SHJ) cells are limited to temperatures below 200°C; tandem cells with a perovskite subcell demand an even greater reduction in process temperature, namely below 130°C. Moreover, to ensure the sustainability of PV production on a TW scale, the use of scarce materials, especially silver, needs to be reduced, as 10% of the world’s supply was already dedicated to PV in 2020. This paper addresses the results obtained in terms of reducing the silver consumption in interconnection technology based on electrical conductive adhesive (ECA) and Pb-free ribbons.
Photovoltaics International Archive
Photovoltaics International Papers, PV Modules
After several years of technological developments, measurement and quality standard specifications, and bifaciality implementations in energy yield simulation programs, bifacial PV has become reliable and will shortly become accepted as a valuable commodity. Since 2020, bifacial passivated emitter and rear cell (PERC) technology has been king of the energy markets, and, in combination with simple tracking systems (e.g. horizontal single-axis tracking – HSAT), the lowest electricity costs have been achieved. Because PERC is reaching its limit in terms of efficiency, and n-type technology is gaining momentum, in the future n-type PV (nPV) will replace PERC technology as the workhorse of the PV electricity market. This paper describes why, and most likely when, this will happen and which n-type technologies will be leading the pack in the race to bring electricity costs well below €0.01/kWh.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
As the PV industry rapidly advances towards annual PV production and installations on a terawatt scale, many aspects that are currently not critical will need to be considered. Among these, material availability is probably one of the most pressing ones. Established production routines will need to be changed, which may pose significant time constraints in the light of the fast-growing market. The focus of this paper will be on the use of silver for solar cell metallization. Past developments are discussed and an overview is given of the fast-growing number of relevant publications from the scientific community that deal with the problems associated with silver.
Photovoltaics International Archive
Cell Processing, Photovoltaics International Papers
This paper reviews the steps to making a breakthrough in TOPCon efficiency, from cell to PV module, by using industrially viable manufacturing processes. A detailed characterization and investigation of the primary losses of JinkoSolar’s TOPCon record cell of July 2020, with an efficiency of 24.8%, is presented.

Subscribe to Newsletter

Upcoming Events

Solar Media Events
October 4, 2022
New York, USA
On-Demand Webinars, Solar Media Events
October 11, 2022
Virtual event
Upcoming Webinars
October 18, 2022
10am (EDT) / 4pm (CEST)