CPV technology looking good as long as cost reduction goals achieved, says GTM Research

  •   Soitec Solar CPV system to be used in several utility-scale projects
    Soitec Solar CPV system to be used in several utility-scale projects
  •   GTM Research, highlights a brighter future for the sector should CPV companies achieve their cost reduction roadmaps.
    GTM Research, highlights a brighter future for the sector should CPV companies achieve their cost reduction roadmaps.
The cost competitive position of concentrating photovoltaic (CPV) technologies, especially since polysilicon prices have continued to fall from the heights of 2008, have constrained more widespread adoption. However, a new detailed report from GTM Research highlights a brighter future for the sector should CPV companies achieve their cost reduction roadmaps. In particular, the installed cost of CPV systems need to be reduced by more than 30% over the next four years for CPV installations to reach a healthy 1GW per annum rate by 2015.
 
“Developers choosing a solar technology for a large power plant focus on two factors: cost per kilowatt-hour (kWh), and bankability,” noted Brett Prior, the report’s coauthor and senior analyst at GTM Research. “CPV’s promise has been a lower cost/kWh, but it has been hamstrung by a lack of bankability, as the technology’s track record is much shorter and its performance warranties were not backed by strong corporate parents.” 
 
The report, entitled “Concentrating Photovoltaics 2011: Technology, Costs and Markets,” highlights that there are three CPV companies (Amonix, Soitec Solar [the former Concentrix], and SolFocus) leading the CPV market for installations by accounting for 96% of global projects in operation, construction, or development (with signed power purchase agreements). 
 
However, new and existing entrants are gaining traction at a much-faster pace, supporting arguments that competitive cost structures are improving, despite limited manufacturing scale, and proving that projects can be secured, as recent announcements support.
 
“These relationships will be key in generating additional demand for CPV projects,” added Prior. “They bring credibility to the technology, and will help future plants to secure project finance from the major banks.” 
 
However, both conventional C-Si and thin-film technologies dominate the PV market, as the CPV installed base is at only 28MW globally, compared to 33GW of total cumulative installations, according to the report. 
 
A key area where costs could be reduced is in improving cell efficiencies; a number of companies have set new efficiency records, primarily with triple-junction cell technologies. 
 
Total system costs should also get a boost as more projects get built and a steeper cost reduction learning curve gains traction.
 

Post a Comment

Post

Newsletter

Preview Latest Subscribe
We won't share your details - promise!

Publications

  • Photovoltaics International 16th Edition

    Photovoltaics International 16th Edition

    This sixteenth edition of Photovoltaics International marks four years of production of the quarterly journal. As always, our focus is on efficiency and quality improvement and cost reduction in manufacturing. As 2012 rolls along, companies are falling by the wayside due to supply and demand issues, ASP declines and drastic governmental subsidy cuts. A clear picture of 2012 is offered through papers from the likes of TÜV Rheinland, Fraunhofer ISE, SEMI PV Group and EPIA, amongst others.

  • Photovoltaics International Lite, Volume 05 - 2011

    Photovoltaics International Lite, Volume 05 - 2011

    This digital interactive Lite sees Tom Cheyney follow Agua Caliente’s progress on becoming one of first truly utility-scale PV power farms, where 40–50MW (AC) will be commissioned by the end of the year. We also feature one of the world’s largest silicon thin-film PV power plants, Avenal; a report on warnings of the collapse of module prices from Solarbuzz and PI-Berlin presents tips on PV module testing. A print version of this edition will be distributed at Solar Power International 2011 in Dallas, Texas.

  • Manufacturing The Solar Future: The 2012 Production Annual

    Manufacturing The Solar Future: The 2012 Production Annual

    Manufacturing the Solar Future 2012, the second in the Photovoltaics International PV Production Annual series, delivers the next installment of in-depth technical manufacturing information on PV production processes.

Partners

Acknowledgements

Solar Media