PVI Paper

PV manufacturing capacity expansion announcement plans and analysis for Q3 2017

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on reddit
Reddit
Share on email
Email

By Mark Osborne, Senior News Editor, Photovoltaics International

The month of July proved to be the most active for new capacity expansion announcements in the third quarter of 2017.

L3dwLWNvbnRlbnQvdXBsb2Fkcy9sZWdhY3ktcHVibGljYXRpb24tcGRmcy8wNjdjZmFiN2RmLXB2LW1hbnVmYWN0dXJpbmctY2FwYWNpdHktZXhwYW5zaW9uLWFubm91bmNlbWVudC1wbGFucy1hbmQtYW5hbHlzaXMtZm9yLXEzLTIwMTcucGRm

Published In

PVI Issue
Welcome to the 38th edition of Photovoltaics International. There is every sign that 2018 is going to be a huge year for the industry as manufacturers continue investing in new tools and technologies. We will doubtless see many of the innovations whose evolution has been documented in these pages becoming increasingly mainstream. Sticking with bifacial solar, Fraunhofer ISE takes a wide-ranging look at a number of challenges surrounding the technology’s leap to widespread deployment. The Institute for Solar Energy Research Hamelin (ISFH) and Meyer Burger Technology AG present a novel bifacial module architecture. The University of New South Wales, Trina Solar and BT Imaging give a suggestion for predicting the variation in multicrystalline cell performance by measuring the bulk lifetime of ingots. We also have a look at PV recycling and lifecycle management from First Solar, PI Berlin’s assessment of PID issues in thin-film solar and TongWei presents a roadmap for PERC cells with 22% efficiency.

Read Next

PVI Paper
Cell Processing, Photovoltaics International Papers
This paper presents preliminary results of SERIS’ biPolyTM cell: the bifacial application of polysiliconbased passivating contact stacks with front and rear screen-printed and fired metallization.
PVI Paper
Cell Processing, Photovoltaics International Papers
This work reports the latest results obtained at Jolywood for full-area (251.99cm2) n-type bifacial passivating-contact solar cells using a cost-effective process with industrially-feasible boron diffusion, phosphorus ion implantation and low-pressure chemical vapour deposition (LPCVD) with in situ oxidation.
PVI Paper
Cell Processing, Photovoltaics International Papers
This paper reviews the key technology improvements which have enabled a continuous 0.5%abs/year increase in efficiency of industrial PERC and PERC+ cells.
PVI Paper
Photovoltaics International Papers, Thin Film
This paper provides a concise overview of existing c-Si-based 2-, 3- and 4-terminal tandem technologies, summarizes the current development status, and sets out the future roadmap. In addition, a discussion is included of what will be required over the coming years to bring these promising technologies to market, enabling commercial efficiencies above 30%.
PVI Paper
Photovoltaics International Papers, Thin Film
This paper discusses, at both the cell and the module level, the balance between the advantages and drawbacks of increasing the cell bifaciality from a typical value of 90% towards 100%, or decreasing it towards that of monofacial cells (0%).
PVI Paper
Photovoltaics International Papers, PV Modules
Because it leads to higher efficiencies than aluminium back-surface field (Al-BSF) cells, passivated emitter and rear cell (PERC) technology is attracting more and more attention in the industry and gaining market share. However, PERC technology brings new challenges with regard to the phenomenon of degradation: some monofacial/bifacial PERC cell modules were found to demonstrate much higher power degradation than Al-BSF cell modules after damp-heat (DH: 85°C and 85% relative humidity RH, 1000h) and potential-induced degradation (PID: 85°C and 85% RH, –1,500V, 96h) tests, which will be the focus of this paper.

Subscribe to Newsletter

Upcoming Events

Solar Media Events
March 9, 2021
Solar Media Events
March 17, 2021
Solar Media Events
April 13, 2021
Solar Media Events
April 20, 2021
Get 50% off!
Subscribe before 5th of April 2020!