Technical Papers

Climate change, oil shortage, green energy, energy security – these are some of the global `mega´-topics currently dominating the agenda in the news, in politics and in private lives. One of the industries that has most profited from the ever-growing consciousness about the need to de-carbonize current energy use is the photovoltaic industry. With this economic background, the photovoltaic industry has experienced impressive growth rates in the last decade and is expected to grow at 30% per year over at least the next couple of years. Since its upswing, it has become a multi-billion dollar industry and subject to speculation on stock exchanges worldwide.

The rapid growth of the solar energy industry owes its success to the development and production of mono- and multi-crystalline solar cells. This growth has been limited in recent years due to the lack of available supply of polysilicon, the key raw material for making the wafers that serve as the basis of the solar cell. As a result of this limitation, the price of polysilicon has increased dramatically and this has led to significant new and planned capacity expansions. These new capacity expansion announcements have been highly publicized, with little additional outside focus on other chemicals and materials.

The photovoltaic industry was once, and for quite some time, the unappreciated renewable technology. Perceived as too expensive without subsidies to reduce the price of ownership, and sometimes as an energy choice primarily for environmental zealots, the industry has continued, nonetheless, to grow at a compound annual rate of 34% over the past 30 years. Growth at this rate would be envied by any industry, and certainly deserves recognition, particularly as it has come with significant problems and has been extremely difficult to achieve. Now, with worldwide consensus on global warming along with sufficient evidence that fossil fuels are rapidly depleting, solar electricity is finally earning some respect - but the industry still has perception problems to solve.

Si etch processes are vital steps in Si solar cell manufacturing. They are used for saw damage removal, surface texturing and parasitic junction removal. The next generation of Si solar cells, featuring thinner wafers and passivated rear surface, will pose more stringent demands on those steps. Surface decoupling (achieving different surface treatments on the front and the rear) has to be achieved while minimizing Si consumption. Plasma texturing is an emerging technique that appears very promising in that respect, as efficiencies as high as 17.4 % have been achieved on screenprinted multicrystalline Si solar cells incorporating this process.

Many readers will equate SEMI with the SEMICON trade shows around the world, business and technical conferences, EHS and advocacy initiatives and, most of all, industry standards. Currently, SEMI has close to 2,000 member companies, about 20% of which are active in the photovoltaic sector. These companies form a community called PVGroup – a community that addresses opportunities and obstacles collectively, bringing low-cost PV technology and sustainable clean energy to the world. SEMI is supporting this segment by expanding our key competencies – shows, standards, advocacy, and market research – into this new space.

Every day, mankind consumes as much energy as it took the earth 1,370 years to store. The International Energy Agency estimates that by the year 2030, worldwide electricity consumption will have increased annually by approximately 2.4%. City Solar AG is seeking to increase renewable energy stocks through grid-connected solar power utilities. As one of the leading producers of large-scale photovoltaic plants, City Solar is uniquely placed to give us a better understanding of how these plants are put together.

The next two years will be crucial in determining the market viability and future of what many see as the most promising thin-film photovoltaics technology: copper indium gallium (di)selenide (CIGS) and its gallium-free cousin, CIS. With potential conversion efficiencies just below that of crystalline silicon PV, low-cost manufacturing strategies offering a chance to reach sub-dollar-per-watt manufacturing costs on both glass and flexible modules, and applications ranging from utility- and industrial-scale farms to building-integrated commercial and residential uses, the quaternary compound has a large grid-parity upside - if the very real challenges of scaling production to commercial volume can be met.

Today’s PV industry is growing at a rapid rate, but the industry would grow even faster if costs could be reduced for both the final products and the capital investment required for scale-up. One strategy for reducing module cost is to reduce the amount of semiconductor material needed (the cost of the silicon solar cells typically comprises more than half of the module cost). Many companies are thinning the silicon wafers to reduce costs incrementally; others use thin-film coatings on low-cost substrates (such as amorphous/microcrystalline silicon, cadmium telluride, or copper indium gallium (di)selenide on glass or other substrates). Concentrating photovoltaics (CPV) follows a complementary approach and uses concentrating optics, which may be designed for low or high concentration, to focus the light onto small cells. Low-concentration concepts use silicon or other low-cost cells; high-concentration optics may use more expensive, higher-efficiency cells. The higher-efficiency cells can reduce the cost-per-watt if the cost of the small cells is minimal.

Solar enterprises will each be faced with the occasional surplus or lack of solar modules in their lifetimes. In these instances, it is useful to adjust these stock levels at short notice, thus creating a spot market. Spot markets serve the short-term trade of different products, where the seller is able to permanently or temporarily off-set surplus, while buyers are able to access attractive offers on surplus stocks and supplement existing supply arrangements as a last resort.

Standardized requirements for the quality of PV modules, solar cells and wafers are given in the according IEC norms (e.g., IEC 61215, 61646, and IEC 61730 for modules). However, the manufacturers of cells purchasing wafers and the module manufacturers purchasing cells want information beyond the final check of the product and to monitor each step during the production process to identify harsh handling and/or machine faults at the earliest stage possible. With consequential improvements of the process enabled, continuous improvements in throughput and yield improvement of the factory are likely, also allowing an early feedback on quality issues to the raw material supplier. Furthermore, by knowing all characteristics and factors of the cell and the module, prediction of electrical energy yield during the life cycle of a PV power plant is becoming more accurate and more reliable.