JinkoSolar expects n-type modules to account for 60% of total shipments in 2023

Facebook
Twitter
LinkedIn
Reddit
Email
JinkoSolar targets to reach a production capacity of 55GW for its n-type tunnel oxide passivated contact (TOPCon) modules in 2023. Image: JinkoSolar.

JinkoSolar has finished 2022 with 44.5GW of solar modules shipped globally and expects to have 60% of all shipments in 2023 from its n-type products.

The ‘Solar Module Super League’ (SMSL) member is aiming to finish 2023 with mono wafer, cell and module capacities of 75GW, 75GW and 90GW, respectively, thus continuing with its capacity increase across the supply chain from last year and adding 20GW of module capacity from the previous quarter’s target of 70GW.

This article requires Premium SubscriptionBasic (FREE) Subscription

Unlock unlimited access for 12 whole months of distinctive global analysis

Photovoltaics International is now included.

  • Regular insight and analysis of the industry’s biggest developments
  • In-depth interviews with the industry’s leading figures
  • Unlimited digital access to the PV Tech Power journal catalogue
  • Unlimited digital access to the Photovoltaics International journal catalogue
  • Access to more than 1,000 technical papers
  • Discounts on Solar Media’s portfolio of events, in-person and virtual

Or continue reading this article for free

JinkoSolar ended 2022 with solar wafer, cell and module capacities of 65GW, 55GW and 70GW respectively as it continues its shift to n-type tunnel oxide passivated contact (TOPCon) modules.

The company started the production of 35GW of TOPCon capacity in 2022 and expects to end this year with an annual production capacity of 55GW in 2023.

The company continues to gradually shift towards TOPCon modules with the second phase of its 8GW facility in Hefei reaching full production during Q4 2022 and the second phase of the 11GW annual TOPCon cell capacity in Jianshan expected to reach full production in March 2023.

Moreover, the company doubled its yearly module shipment from 22.2GW in 2021 to 44.5GW last year, as it ended Q4 2022 with 16GW of modules shipped, of which 7GW from its n-type products.

The increased demand for the SMSL member’s modules came primarily from China and Europe with module shipments nearly trebling and doubling respectively year-on-year, while both markets accounted for more than 65% of total shipments last year.

Regarding the US market and the Uyghur Forced Labor Prevention Act (UFLPA) that went into effect on 21 June 2022 – and has been hit with module shipment delays due to required customs clearances – the company expects to “allocate more capacity and shipments to the US once all the customer clearance is back to a normal status, which we believe could happen soon,” said Li during an analyst conference call.

As the company’s module shipments continue to grow, revenue during Q4 2022 was up to US$4.4 billion, an increase of 55.8% sequentially and 85.5% year-on-year. The SMSL member finished its financial year 2022 with a revenue of US$12.1 billion, almost doubling the revenue registered in 2021.

After the recent price changes in polysilicon that dropped significantly to RMB130/kg (US$18.94/kg) at the beginning of the year – when buyers were holding off to buying more supply – before stabilising around RMB220/kg in the past couple of weeks, the price of polysilicon is expected to decline again later this year as the supply will be able to support the module demand throughout the year, according to Xiande Li, chairman and CEO at JinkoSolar.

“We expect the market demand for PV products to continue to increase in 2023,” added Li.

Xiande Li, chairman and CEO at JinkoSolar, expects the price of polysilicon to decline further in 2023. Chart: PV Tech.

During Q4 2022, the Chinese module manufacturer supplied 522MW of modules to one of the largest solar PV projects in Brazil, located in the state of Paraíba.

Also during the company’s fourth quarter of 2022, it achieved new records in terms of solar conversion efficiency as JinkoSolar increased its n-type TOPCon monocrystalline solar cell efficiency record from 26.1% in October to 26.4%, in December.

The company added that the integrated cost of n-type modules reached parity on p-type modules at the end of last year, as the mass production efficiency of n-type TOPCon cells reached 25.1% at the end of 2022.

In its forward guidance for 2023, JinkoSolar expects to ship between 11-13GW of modules during the first quarter of 2023, while for the entire year module shipments are targeted to be around 60-70GW.

Conference call transcript from Seeking Alpha.

Read Next

May 12, 2025
Researchers from the University of New South Wales (UNSW) and the University of Newcastle have found that “hidden contaminants” in TOPCon and HJT modules can lead to a power loss of up to 16%.
May 12, 2025
CEA's Martin Meyers considers the pros and cons of the different PV cell technology options for manufacturers starting production in the US.
May 12, 2025
SEG Solar has commissioned the first phase of its newest cell manufacturing facility, in Indonesia, with a production capacity of 2GW.
May 9, 2025
Scatec has announced revenues of NOK2.39 billion (US$230 million) and profits of NOK1 billion (US$96 million) in the first quarter of 2025.
May 9, 2025
Continued “weak demand” from the commercial and industrial (C&I) and residential segments has negatively impacted SMA Solar’s sales and income in the first quarter of 2025.
May 8, 2025
The attachment rate of energy storage with a solar array has reached 69% in the first quarter of 2025 for US residential installer Sunrun, while the company expects the tariff outlook to be manageable.

Subscribe to Newsletter

Upcoming Events

Solar Media Events
May 21, 2025
London, UK
Solar Media Events
June 17, 2025
Napa, USA
Solar Media Events
July 1, 2025
London, UK
Solar Media Events
July 1, 2025
London, UK
Solar Media Events
July 8, 2025
Asia