Discover our upstream and downstream technical journals
A subsidy-free PV project in the UK that was energised by Next Energy Solar Fund last year. Image: NESF.

A subsidy-free PV project in the UK that was energised by Next Energy Solar Fund last year. Image: NESF.

The UK should transition to zero carbon electricity generation by 2035 and have 85GW of installed solar capacity by 2050 if the country is to meet its net zero target.

That is according to a new report from the UK government’s climate advisory body, which forecasts an average build rate of 3GW of additional solar per year between 2030 and 2050, with solar’s levelised cost of electricity expected to be £40/MWh (US$52.7/MWh) by mid-century.

The Climate Change Committee (CCC) report, called the Sixth Carbon Budget, is described as the world’s first detailed roadmap for a fully decarbonised nation, and comes after the UK's net zero ambition was enshrined in law last year. After ditching coal generation by 2024, the plan calls for the government to phase out unabated gas for electricity generation by 2035.

The CCC said the changes are “feasible and affordable”, but only if they are led by decisive action from government. “As we emerge from the COVID-19 pandemic, the Sixth Carbon Budget is a chance to jump-start the UK’s economic recovery. Anything less would shut us out of new economic opportunities,” said CCC chairman Lord Deben.

According to the report, the UK currently has an installed capacity of 13GW of large-scale solar, requiring 290km2 of land. Maximising the potential of solar generation would need an additional 1,500km2 of land to be used. 

With offshore wind expected to become the backbone of the UK energy system, the technology’s capacity is expected to reach 95GW by 2050, with solar providing between 10% and 15% of total generation.

CCC says that while solar is less suitable to meet the seasonal patterns of demand in the UK, which is higher in winter due to heating requirements, surplus generation when output is high could be used to produce green hydrogen. It forecasts low-carbon hydrogen to be almost as large, in 2050, as electricity production is today.

New uses for the growth in clean energy are expected to be found in transport, heating and industry, pushing up electricity demand by 50% over the next 15 years, and doubling or even trebling demand by mid-century.

Meanwhile, to accommodate the high levels of renewables, a more flexible energy system will be needed, the report said, requiring improvements in system flexibility from storage, interconnection and demand-side response.

With the UK set to host the 26th UN Climate Change Conference of the Parties (COP26) in Glasgow next November, the roadmap has been largely welcomed by the country’s renewables industry.

Rebecca Williams, head of policy and regulation at trade association RenewableUK, said: “The CCC is right to urge government to move faster to reach net zero by taking a series of key steps which will benefit consumers by delivering cheap energy, as well as slashing carbon emissions.” She has called on the government to ramp up renewable hydrogen as well as onshore and floating wind.  

Rob Gross, director of the UK Energy Research Centre, said that while progress in the power sector has been strong, with emissions halved in the last decade, challenges remain, particularly in terms of system balancing.

“We need to address the inter-seasonal mismatch in demand and output,” he said. “Interconnection and smart charging of cars, or heating of homes will help, but if we cannot store electricity for longer than a few hours, we will have to curtail the generation of zero carbon electricity when supply exceeds demand. We need cost effective bulk storage if we are to avoid wasting low carbon electricity and resorting to fossil-fired plant when supply is low.”

Tags: uk, energy transition, utility-scale solar, net zero, ccc, battery storage, green hydrogen

Upcoming Webinars

Revealing the most bankable and reliable PV module suppliers for utility-scale deployment in the US

Jan 20, 2021 GMT

Virtually all PV modules for large-scale utility-based solar sites are imported to the US, especially from Chinese companies using manufacturing sites across Southeast Asia. This puts extreme pressure on US site developers, EPCs and investors, in understanding fully the differences between the companies offering imported PV modules How credible are the companies supplying the products? What is the financial health of the parent entity? Where is the module produced, and is this undertaken in-house or through third-party OEMs? What is the supply-chain for the module sub-components including wafers and cells? And then, how will the modules perform in the field, and is it possible to gauge reliability levels benchmarked against competitors? This webinar will provide insights from two of the leading experts in PV module manufacturing, supply, performance and reliability: Jenya Meydbray of PV Evolution Labs and Finlay Colville from PV-Tech. The 1-hour session will include presentations from Jenya and Finlay, and then a brand-new supplier scorecard matrix that combines the key outputs from PVEL's Module Reliability Scorecard and PV-Tech's PV ModuleTech Bankability Ratings, with specific focus on module supply and use in the US market.

Register now

Comments