Sunpreme takes lead in high-performance bifacial deployment with 12.8MW project

Facebook
Twitter
LinkedIn
Reddit
Email
Sunpreme said had completed deployment of 12.8MW utility-scale project in the Eastern region of the US, using its bifacial double glass GxB370W panels, with 21.5% cell efficiency. Image: Sunpreme

Hybrid amorphous Si thin-film module producer Sunpreme said had completed deployment of 12.8MW utility-scale project in the Eastern region of the US, using its bifacial double glass GxB370W panels, with 21.5% cell efficiency.

Dr. Ashok Sinha, Sunpreme's Chairman and CEO said, “We leverage our proprietary Hybrid Cell Technology (HCT) for Performance, and an innovative lean manufacturing process for Cost. These differentiators have resulted in three outstanding cost benefits customers care about: (a) a higher string level AC/DC peak power ratio (b) an increased low-light sensitivity with a greater energy yield (kWh per kWp) and (c) a correspondingly lower Levelized Cost of Energy,” added Sinha.

This article requires Premium SubscriptionBasic (FREE) Subscription

Try Premium for just $1

  • Full premium access for the first month at only $1
  • Converts to an annual rate after 30 days unless cancelled
  • Cancel anytime during the trial period

Premium Benefits

  • Expert industry analysis and interviews
  • Digital access to PV Tech Power journal
  • Exclusive event discounts

Or get the full Premium subscription right away

Or continue reading this article for free

Sunpreme also touted that its hybrid bifacial modules had a lower thermal coefficient of efficiency of -0.28% %/C, due to a higher Voc of 725-735 mV because of its application of ultra-thin amorphous Si films to create a split p-i-n junction for higher efficiency and lower shunt resistance.

“Sunpreme's double-glass modules provide STC outputs from 320 W (60-cell) to 390 W (72-cell) and 510 W (96-cell), enabling high performance, cost-effective solar solutions for residential, commercial distributed generation and large utility scale markets,” stated Homi Fatemi, SVP of Global Business Development and Strategic Partnerships.

Depending on the ground surface (albedo) light reflected to the backside cell, module conversion efficiencies can be boosted by 10% to 30%. 

Bifacial modules have been touted as a key high-performance commercial rooftop product and ideal for high albedo ground regions such as the Atacama Desert. Bifacial modules are also seen as a key product for carports. 

Read Next

Sponsored
July 17, 2026
At Intersolar 2026, PV Tech sat down with Suntech's General Manager Mr. Yang Hao to discuss how a quarter-century of experience, combined with robust industrial backing, positions the company for the industry's next chapter. 
July 16, 2026
LONGi’s has unveiled a suite of new technologies intended to demonstrate how the PV industry can innovate its way out of its current malaise.
July 16, 2026
In the second of a two-part post, Moustafa Ramadan, head of PV Tech Research, explores the increasingly complex risks associated with solar cell procurement in the US.
Premium
July 15, 2026
US module and soon-to-be cell manufacturer T1 Energy is looking beyond wafers and cells to catalyse domestic production of ancillary components such as glass, frames and even pallets—while tapping semiconductor industry talent to staff its expanding operations.
July 13, 2026
JinkoSolar has announced a senior management change as the company continues to struggle with losses.
Sponsored
July 13, 2026
Dylan Middleton and Ruiqi Hua of JA discuss the importance of traceability, decarbonisation and circularity in PV module manufacturing.

Upcoming Events

Solar Media Events
October 13, 2026
San Francisco Bay Area, USA
Solar Media Events
November 3, 2026
Málaga, Spain
Solar Media Events
November 24, 2026
Warsaw, Poland
Solar Media Events
April 20, 2027
Istanbul, Türkiye